Safety & Compliance Forum

Safety & Compliance Info & Resources for
The Power Electronics Industry.

Safety & Compliance Database






For copies of Standards, please contact the appropriate agency. PSMA does not provide copies of standards.
DANSK Standard

Danish Standards is the national standardisation organisation in Denmark. We contribute to the work of the European organisations CEN, CENELEC and ETSI, and the international standardisation organisations ISO and IEC. Danish Standards chooses to implement most of the standards from these organisations in Denmark. When a European or international standard has been implemented in Denmark, this is reflected in the title, e.g. DS/EN or DS/ISO. The contents are similar to those in the EN or ISO standard that can be purchased in another country. It is available in either English or Danish.
Our primary fields of activity include:

  • Standardisation
  • Sale of standards and handbooks
  • Courses and conferences
  • Ecolabelling

Within our core activity of standardisation, Danish Standards has concluded a performance contract with the Ministry of Business and Growth. The contract sets out the framework and objectives for our activities as a national standardisation organisation. A performance contract with the Danish Environmental Protection Agency concerning the EU and Nordic ecolabels, the so-called Flower and the Swan, has also been concluded.

 

Locations: Europe - Denmark
 
Application:
DS/EN 61000-3-2:2014 - Start year: : 2014
Description:

Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)

Notes:

This part of IEC 61000 deals with the limitation of harmonic currents injected into the public
supply system.
It specifies limits of harmonic components of the input current which may be produced by
equipment tested under specified conditions.
Harmonic components are measured according to Annexes A and B.
This part of IEC 61000 is applicable to electrical and electronic equipment having an input
current up to and including 16 A per phase, and intended to be connected to public low-voltage distribution systems.
Arc welding equipment which is not professional equipment, with input current up to and
including 16 A per phase, is included in this standard.
Arc welding equipment intended for professional use, as specified in IEC 60974-1, is excluded
from this standard and may be subject to installation restrictions as indicated in IEC 61000-3-4.
The tests according to this standard are type tests. Test conditions for particular equipment are given in Annex C.
For systems with nominal voltages less than 220 V (line-to-neutral), the limits have not yet
been considered.

Start Year / Status
Application: Equipment, Electrical
DS/EN 61000-3-2:2014 - Start year: : 2014
Description:

Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)

Notes:

This part of IEC 61000 deals with the limitation of harmonic currents injected into the public
supply system.
It specifies limits of harmonic components of the input current which may be produced by
equipment tested under specified conditions.
Harmonic components are measured according to Annexes A and B.
This part of IEC 61000 is applicable to electrical and electronic equipment having an input
current up to and including 16 A per phase, and intended to be connected to public low-voltage distribution systems.
Arc welding equipment which is not professional equipment, with input current up to and
including 16 A per phase, is included in this standard.
Arc welding equipment intended for professional use, as specified in IEC 60974-1, is excluded
from this standard and may be subject to installation restrictions as indicated in IEC 61000-3-4.
The tests according to this standard are type tests. Test conditions for particular equipment are given in Annex C.
For systems with nominal voltages less than 220 V (line-to-neutral), the limits have not yet
been considered.

Start Year / Status
Application: Equipment, Electronic
DS/EN 61000-3-2:2014 - Start year: : 2014
Description:

Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)

Notes:

This part of IEC 61000 deals with the limitation of harmonic currents injected into the public
supply system.
It specifies limits of harmonic components of the input current which may be produced by
equipment tested under specified conditions.
Harmonic components are measured according to Annexes A and B.
This part of IEC 61000 is applicable to electrical and electronic equipment having an input
current up to and including 16 A per phase, and intended to be connected to public low-voltage distribution systems.
Arc welding equipment which is not professional equipment, with input current up to and
including 16 A per phase, is included in this standard.
Arc welding equipment intended for professional use, as specified in IEC 60974-1, is excluded
from this standard and may be subject to installation restrictions as indicated in IEC 61000-3-4.
The tests according to this standard are type tests. Test conditions for particular equipment are given in Annex C.
For systems with nominal voltages less than 220 V (line-to-neutral), the limits have not yet
been considered.

Start Year / Status
Application: Harmonic Current Injection Limitation
DS/EN 61000-3-2:2014 - Start year: : 2014
Description:

Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)

Notes:

This part of IEC 61000 deals with the limitation of harmonic currents injected into the public
supply system.
It specifies limits of harmonic components of the input current which may be produced by
equipment tested under specified conditions.
Harmonic components are measured according to Annexes A and B.
This part of IEC 61000 is applicable to electrical and electronic equipment having an input
current up to and including 16 A per phase, and intended to be connected to public low-voltage distribution systems.
Arc welding equipment which is not professional equipment, with input current up to and
including 16 A per phase, is included in this standard.
Arc welding equipment intended for professional use, as specified in IEC 60974-1, is excluded
from this standard and may be subject to installation restrictions as indicated in IEC 61000-3-4.
The tests according to this standard are type tests. Test conditions for particular equipment are given in Annex C.
For systems with nominal voltages less than 220 V (line-to-neutral), the limits have not yet
been considered.

Start Year / Status
Application: Input Current > 16A per phase
DS/EN 61000-3-2:2014 - Start year: : 2014
Description:

Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)

Notes:

This part of IEC 61000 deals with the limitation of harmonic currents injected into the public
supply system.
It specifies limits of harmonic components of the input current which may be produced by
equipment tested under specified conditions.
Harmonic components are measured according to Annexes A and B.
This part of IEC 61000 is applicable to electrical and electronic equipment having an input
current up to and including 16 A per phase, and intended to be connected to public low-voltage distribution systems.
Arc welding equipment which is not professional equipment, with input current up to and
including 16 A per phase, is included in this standard.
Arc welding equipment intended for professional use, as specified in IEC 60974-1, is excluded
from this standard and may be subject to installation restrictions as indicated in IEC 61000-3-4.
The tests according to this standard are type tests. Test conditions for particular equipment are given in Annex C.
For systems with nominal voltages less than 220 V (line-to-neutral), the limits have not yet
been considered.

Start Year / Status
Application: Power Factor Correction (PFC)
DS/EN 61000-3-2:2014 - Start year: : 2014
Description:

Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)

Notes:

This part of IEC 61000 deals with the limitation of harmonic currents injected into the public
supply system.
It specifies limits of harmonic components of the input current which may be produced by
equipment tested under specified conditions.
Harmonic components are measured according to Annexes A and B.
This part of IEC 61000 is applicable to electrical and electronic equipment having an input
current up to and including 16 A per phase, and intended to be connected to public low-voltage distribution systems.
Arc welding equipment which is not professional equipment, with input current up to and
including 16 A per phase, is included in this standard.
Arc welding equipment intended for professional use, as specified in IEC 60974-1, is excluded
from this standard and may be subject to installation restrictions as indicated in IEC 61000-3-4.
The tests according to this standard are type tests. Test conditions for particular equipment are given in Annex C.
For systems with nominal voltages less than 220 V (line-to-neutral), the limits have not yet
been considered.

Start Year / Status
We welcome your input!
Use this button to let us know about any standards, agencies or other
information you believe we've left out, or any errors you find. Thank you.