Safety & Compliance Forum

Safety & Compliance Info & Resources for
The Power Electronics Industry.

Safety & Compliance Database

For copies of Standards, please contact the appropriate agency. PSMA does not provide copies of standards.

Agencies:

Japanese Industrial Standards Committee(JISC)

JISC is the abbreviation for the Japanese Industrial Standards Committee, which was established within the Ministry of Economy, Trade and Industry to conduct surveys and deliberations on industrial standardization based on the Industrial Standardization Act. Specifically, the JISC is set up to conduct deliberations on the adoption and revision of JIS, and to submit reports based on recommendations to related ministers and conduct consultations therewith with regard to the promotion of industrial standardization, as aspects of which include industrial standards, JIS Mark Certification System, and the Japan National Laboratory Accreditation System. The JISC also participates in international standard development activities as Japan’s sole representative body in the ISO and the IEC.

Locations: Japan - Japan

Links:

Top | Agency Links | Archived Events | Standards

· JISC homepage

Top | Agency Links | Archived Events | Standards

Standards:

Application:

Start Year / Status
JIS C 61000-3-2:2011 - Start year: : 2011 Description: Electromagnetic compatibility (EMC) -- Part 3-2: Limits -- Limits for harmonic current emissions (equipment input current <=20 A per phase) (Foreign Standard)
Notes:
Harmonizing standards: · Limitation of Harmonic Currents AS/NZS 61000-3-2:2013: Electromagnetic compatibility (EMC) - Part 3.2: Limits - Limits for harmonic current emissions (equipment input current less than or equal to 16 A per phase) Provides manufacturers and suppliers of electricity and users of electrical equipment intended for connection to an electrical network with limits for voltage disturbances and harmonics produced by that equipment and the methods for ascertaining compliance to them in order to maintain electromagnetic compatibility within the electrical network. Adopted with national modifications from IEC 61000-3-2, Ed. 3.2 2009. BS EN 61000-3-2:2014: Electromagnetic compatibility, Electromagnetic radiation, Electromagnetic fields, Electric power system disturbances, Fault currents, Harmonics, Electric power networks, Low-voltage equipment, Noise (spurious signals) BS EN IEC 61000-3-2:2019: Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current ≤16 A per phase) BS EN IEC 61000-3-2:2019+A1:2021: Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current ≤16 A per phase) DS/EN 61000-3-2:2014 : Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) IEC 61000-3-2:2014 : IEC 61000-3-2:2014 deals with the limitation of harmonic currents injected into the public supply system. It specifies limits of harmonic components of the input current which may be produced by equipment tested under specified conditions. It is applicable to electrical and electronic equipment having an input current up to and including 16 A per phase, and intended to be connected to public low voltage distribution systems. Arc welding equipment which is not professional equipment, with input current up to and including 16 A per phase, is included in this standard. Arc welding equipment intended for professional use, as specified in IEC 60974-1, is excluded from this standard and may be subject to installation restrictions as indicated in IEC/TR 61000-3-4 or IEC 61000-3-12. The tests according to this standard are type tests. Test conditions for particular equipment are given in Annex C. For systems with nominal voltages less than 220 V (line-to-neutral), the limits have not yet been considered. This fourth edition cancels and replaces the third edition published in 2005, Amendment 1:2008, Amendment 2:2009 and Corrigendum of August 2009. IEC 61508:2010 CMV: IEC 61508:2010 Commented version, Functional safety of electrical/electronic/programmable electronic safety-related systems The CD contains parts 1 to 7 of IEC 61508 edition 2.0 published in April 2010, along with the IEC 61508 Commented version of the entire series. All files are in PDF format. The IEC 61508:2010 CMV single file is a compilation of the seven-part official IEC standard in English, enriched with the following information: track changes displayed in red, highlight all changes of the technical content made to edition 1.0 hundreds of comments and explanations by a leading expert in Functional Safety, are indicated in the text by a yellow-background number. Mouse over a number to display a pop-up note containing the related comment figures that may accompany these comments, are indicated with a green paperclip in the text Make the best use of the IEC 61508:2010 CMV advanced functionalities: perform a text search use bookmarks and links to navigate throughout all parts of IEC 61508 review the document, reply to the expert's comments or add your own comments JIS C 61000-3-2:2011: Electromagnetic compatibility (EMC) -- Part 3-2: Limits -- Limits for harmonic current emissions (equipment input current <=20 A per phase) (Foreign Standard) UNE-EN 61000-3-2:2014 : Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase)
Standards categories: · Electro-Magnetic Compatibility

Application: Equipment, Electrical

Start Year / Status
JIS C 61000-3-2:2011 - Start year: : 2011 Description: Electromagnetic compatibility (EMC) -- Part 3-2: Limits -- Limits for harmonic current emissions (equipment input current <=20 A per phase) (Foreign Standard)
Notes:
Harmonizing standards: · Limitation of Harmonic Currents AS/NZS 61000-3-2:2013: Electromagnetic compatibility (EMC) - Part 3.2: Limits - Limits for harmonic current emissions (equipment input current less than or equal to 16 A per phase) Provides manufacturers and suppliers of electricity and users of electrical equipment intended for connection to an electrical network with limits for voltage disturbances and harmonics produced by that equipment and the methods for ascertaining compliance to them in order to maintain electromagnetic compatibility within the electrical network. Adopted with national modifications from IEC 61000-3-2, Ed. 3.2 2009. BS EN 61000-3-2:2014: Electromagnetic compatibility, Electromagnetic radiation, Electromagnetic fields, Electric power system disturbances, Fault currents, Harmonics, Electric power networks, Low-voltage equipment, Noise (spurious signals) BS EN IEC 61000-3-2:2019: Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current ≤16 A per phase) BS EN IEC 61000-3-2:2019+A1:2021: Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current ≤16 A per phase) DS/EN 61000-3-2:2014 : Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) IEC 61000-3-2:2014 : IEC 61000-3-2:2014 deals with the limitation of harmonic currents injected into the public supply system. It specifies limits of harmonic components of the input current which may be produced by equipment tested under specified conditions. It is applicable to electrical and electronic equipment having an input current up to and including 16 A per phase, and intended to be connected to public low voltage distribution systems. Arc welding equipment which is not professional equipment, with input current up to and including 16 A per phase, is included in this standard. Arc welding equipment intended for professional use, as specified in IEC 60974-1, is excluded from this standard and may be subject to installation restrictions as indicated in IEC/TR 61000-3-4 or IEC 61000-3-12. The tests according to this standard are type tests. Test conditions for particular equipment are given in Annex C. For systems with nominal voltages less than 220 V (line-to-neutral), the limits have not yet been considered. This fourth edition cancels and replaces the third edition published in 2005, Amendment 1:2008, Amendment 2:2009 and Corrigendum of August 2009. IEC 61508:2010 CMV: IEC 61508:2010 Commented version, Functional safety of electrical/electronic/programmable electronic safety-related systems The CD contains parts 1 to 7 of IEC 61508 edition 2.0 published in April 2010, along with the IEC 61508 Commented version of the entire series. All files are in PDF format. The IEC 61508:2010 CMV single file is a compilation of the seven-part official IEC standard in English, enriched with the following information: track changes displayed in red, highlight all changes of the technical content made to edition 1.0 hundreds of comments and explanations by a leading expert in Functional Safety, are indicated in the text by a yellow-background number. Mouse over a number to display a pop-up note containing the related comment figures that may accompany these comments, are indicated with a green paperclip in the text Make the best use of the IEC 61508:2010 CMV advanced functionalities: perform a text search use bookmarks and links to navigate throughout all parts of IEC 61508 review the document, reply to the expert's comments or add your own comments JIS C 61000-3-2:2011: Electromagnetic compatibility (EMC) -- Part 3-2: Limits -- Limits for harmonic current emissions (equipment input current <=20 A per phase) (Foreign Standard) UNE-EN 61000-3-2:2014 : Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase)
Standards categories: · Electro-Magnetic Compatibility

Application: Equipment, Electronic

Start Year / Status
JIS C 61000-3-2:2011 - Start year: : 2011 Description: Electromagnetic compatibility (EMC) -- Part 3-2: Limits -- Limits for harmonic current emissions (equipment input current <=20 A per phase) (Foreign Standard)
Notes:
Harmonizing standards: · Limitation of Harmonic Currents AS/NZS 61000-3-2:2013: Electromagnetic compatibility (EMC) - Part 3.2: Limits - Limits for harmonic current emissions (equipment input current less than or equal to 16 A per phase) Provides manufacturers and suppliers of electricity and users of electrical equipment intended for connection to an electrical network with limits for voltage disturbances and harmonics produced by that equipment and the methods for ascertaining compliance to them in order to maintain electromagnetic compatibility within the electrical network. Adopted with national modifications from IEC 61000-3-2, Ed. 3.2 2009. BS EN 61000-3-2:2014: Electromagnetic compatibility, Electromagnetic radiation, Electromagnetic fields, Electric power system disturbances, Fault currents, Harmonics, Electric power networks, Low-voltage equipment, Noise (spurious signals) BS EN IEC 61000-3-2:2019: Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current ≤16 A per phase) BS EN IEC 61000-3-2:2019+A1:2021: Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current ≤16 A per phase) DS/EN 61000-3-2:2014 : Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) IEC 61000-3-2:2014 : IEC 61000-3-2:2014 deals with the limitation of harmonic currents injected into the public supply system. It specifies limits of harmonic components of the input current which may be produced by equipment tested under specified conditions. It is applicable to electrical and electronic equipment having an input current up to and including 16 A per phase, and intended to be connected to public low voltage distribution systems. Arc welding equipment which is not professional equipment, with input current up to and including 16 A per phase, is included in this standard. Arc welding equipment intended for professional use, as specified in IEC 60974-1, is excluded from this standard and may be subject to installation restrictions as indicated in IEC/TR 61000-3-4 or IEC 61000-3-12. The tests according to this standard are type tests. Test conditions for particular equipment are given in Annex C. For systems with nominal voltages less than 220 V (line-to-neutral), the limits have not yet been considered. This fourth edition cancels and replaces the third edition published in 2005, Amendment 1:2008, Amendment 2:2009 and Corrigendum of August 2009. IEC 61508:2010 CMV: IEC 61508:2010 Commented version, Functional safety of electrical/electronic/programmable electronic safety-related systems The CD contains parts 1 to 7 of IEC 61508 edition 2.0 published in April 2010, along with the IEC 61508 Commented version of the entire series. All files are in PDF format. The IEC 61508:2010 CMV single file is a compilation of the seven-part official IEC standard in English, enriched with the following information: track changes displayed in red, highlight all changes of the technical content made to edition 1.0 hundreds of comments and explanations by a leading expert in Functional Safety, are indicated in the text by a yellow-background number. Mouse over a number to display a pop-up note containing the related comment figures that may accompany these comments, are indicated with a green paperclip in the text Make the best use of the IEC 61508:2010 CMV advanced functionalities: perform a text search use bookmarks and links to navigate throughout all parts of IEC 61508 review the document, reply to the expert's comments or add your own comments JIS C 61000-3-2:2011: Electromagnetic compatibility (EMC) -- Part 3-2: Limits -- Limits for harmonic current emissions (equipment input current <=20 A per phase) (Foreign Standard) UNE-EN 61000-3-2:2014 : Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase)
Standards categories: · Electro-Magnetic Compatibility

Application: Harmonic Current Injection Limitation

Start Year / Status
JIS C 61000-3-2:2011 - Start year: : 2011 Description: Electromagnetic compatibility (EMC) -- Part 3-2: Limits -- Limits for harmonic current emissions (equipment input current <=20 A per phase) (Foreign Standard)
Notes:
Harmonizing standards: · Limitation of Harmonic Currents AS/NZS 61000-3-2:2013: Electromagnetic compatibility (EMC) - Part 3.2: Limits - Limits for harmonic current emissions (equipment input current less than or equal to 16 A per phase) Provides manufacturers and suppliers of electricity and users of electrical equipment intended for connection to an electrical network with limits for voltage disturbances and harmonics produced by that equipment and the methods for ascertaining compliance to them in order to maintain electromagnetic compatibility within the electrical network. Adopted with national modifications from IEC 61000-3-2, Ed. 3.2 2009. BS EN 61000-3-2:2014: Electromagnetic compatibility, Electromagnetic radiation, Electromagnetic fields, Electric power system disturbances, Fault currents, Harmonics, Electric power networks, Low-voltage equipment, Noise (spurious signals) BS EN IEC 61000-3-2:2019: Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current ≤16 A per phase) BS EN IEC 61000-3-2:2019+A1:2021: Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current ≤16 A per phase) DS/EN 61000-3-2:2014 : Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) IEC 61000-3-2:2014 : IEC 61000-3-2:2014 deals with the limitation of harmonic currents injected into the public supply system. It specifies limits of harmonic components of the input current which may be produced by equipment tested under specified conditions. It is applicable to electrical and electronic equipment having an input current up to and including 16 A per phase, and intended to be connected to public low voltage distribution systems. Arc welding equipment which is not professional equipment, with input current up to and including 16 A per phase, is included in this standard. Arc welding equipment intended for professional use, as specified in IEC 60974-1, is excluded from this standard and may be subject to installation restrictions as indicated in IEC/TR 61000-3-4 or IEC 61000-3-12. The tests according to this standard are type tests. Test conditions for particular equipment are given in Annex C. For systems with nominal voltages less than 220 V (line-to-neutral), the limits have not yet been considered. This fourth edition cancels and replaces the third edition published in 2005, Amendment 1:2008, Amendment 2:2009 and Corrigendum of August 2009. IEC 61508:2010 CMV: IEC 61508:2010 Commented version, Functional safety of electrical/electronic/programmable electronic safety-related systems The CD contains parts 1 to 7 of IEC 61508 edition 2.0 published in April 2010, along with the IEC 61508 Commented version of the entire series. All files are in PDF format. The IEC 61508:2010 CMV single file is a compilation of the seven-part official IEC standard in English, enriched with the following information: track changes displayed in red, highlight all changes of the technical content made to edition 1.0 hundreds of comments and explanations by a leading expert in Functional Safety, are indicated in the text by a yellow-background number. Mouse over a number to display a pop-up note containing the related comment figures that may accompany these comments, are indicated with a green paperclip in the text Make the best use of the IEC 61508:2010 CMV advanced functionalities: perform a text search use bookmarks and links to navigate throughout all parts of IEC 61508 review the document, reply to the expert's comments or add your own comments JIS C 61000-3-2:2011: Electromagnetic compatibility (EMC) -- Part 3-2: Limits -- Limits for harmonic current emissions (equipment input current <=20 A per phase) (Foreign Standard) UNE-EN 61000-3-2:2014 : Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase)
Standards categories: · Electro-Magnetic Compatibility

Application: Power Factor Correction (PFC)

Start Year / Status
JIS C 61000-3-2:2011 - Start year: : 2011 Description: Electromagnetic compatibility (EMC) -- Part 3-2: Limits -- Limits for harmonic current emissions (equipment input current <=20 A per phase) (Foreign Standard)
Notes:
Harmonizing standards: · Limitation of Harmonic Currents AS/NZS 61000-3-2:2013: Electromagnetic compatibility (EMC) - Part 3.2: Limits - Limits for harmonic current emissions (equipment input current less than or equal to 16 A per phase) Provides manufacturers and suppliers of electricity and users of electrical equipment intended for connection to an electrical network with limits for voltage disturbances and harmonics produced by that equipment and the methods for ascertaining compliance to them in order to maintain electromagnetic compatibility within the electrical network. Adopted with national modifications from IEC 61000-3-2, Ed. 3.2 2009. BS EN 61000-3-2:2014: Electromagnetic compatibility, Electromagnetic radiation, Electromagnetic fields, Electric power system disturbances, Fault currents, Harmonics, Electric power networks, Low-voltage equipment, Noise (spurious signals) BS EN IEC 61000-3-2:2019: Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current ≤16 A per phase) BS EN IEC 61000-3-2:2019+A1:2021: Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current ≤16 A per phase) DS/EN 61000-3-2:2014 : Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) IEC 61000-3-2:2014 : IEC 61000-3-2:2014 deals with the limitation of harmonic currents injected into the public supply system. It specifies limits of harmonic components of the input current which may be produced by equipment tested under specified conditions. It is applicable to electrical and electronic equipment having an input current up to and including 16 A per phase, and intended to be connected to public low voltage distribution systems. Arc welding equipment which is not professional equipment, with input current up to and including 16 A per phase, is included in this standard. Arc welding equipment intended for professional use, as specified in IEC 60974-1, is excluded from this standard and may be subject to installation restrictions as indicated in IEC/TR 61000-3-4 or IEC 61000-3-12. The tests according to this standard are type tests. Test conditions for particular equipment are given in Annex C. For systems with nominal voltages less than 220 V (line-to-neutral), the limits have not yet been considered. This fourth edition cancels and replaces the third edition published in 2005, Amendment 1:2008, Amendment 2:2009 and Corrigendum of August 2009. IEC 61508:2010 CMV: IEC 61508:2010 Commented version, Functional safety of electrical/electronic/programmable electronic safety-related systems The CD contains parts 1 to 7 of IEC 61508 edition 2.0 published in April 2010, along with the IEC 61508 Commented version of the entire series. All files are in PDF format. The IEC 61508:2010 CMV single file is a compilation of the seven-part official IEC standard in English, enriched with the following information: track changes displayed in red, highlight all changes of the technical content made to edition 1.0 hundreds of comments and explanations by a leading expert in Functional Safety, are indicated in the text by a yellow-background number. Mouse over a number to display a pop-up note containing the related comment figures that may accompany these comments, are indicated with a green paperclip in the text Make the best use of the IEC 61508:2010 CMV advanced functionalities: perform a text search use bookmarks and links to navigate throughout all parts of IEC 61508 review the document, reply to the expert's comments or add your own comments JIS C 61000-3-2:2011: Electromagnetic compatibility (EMC) -- Part 3-2: Limits -- Limits for harmonic current emissions (equipment input current <=20 A per phase) (Foreign Standard) UNE-EN 61000-3-2:2014 : Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase)
Standards categories: · Electro-Magnetic Compatibility

We welcome your input!
Use this button to let us know about any standards, agencies or other
information you believe we've left out, or any errors you find. Thank you.

Safety & Compliance Forum

Safety & Compliance Info & Resources for The Power Electronics Industry.

Safety & Compliance Info & Resources for
The Power Electronics Industry.