WOW!. Happy 35th Anniversary PSMA.
In the 1970s and early 80s the power electronics industry encountered a huge leap in power supply design technology driven in part by the introduction by Apple and IBM of personal computers. Up until that time, the technology primarily used was large and heavy linear technology power conversion, "boat anchors" manufactured in two car garages as the expression went. During that time, the industry also began to face the challenge of transitioning to bi-polar and high frequency MOSFET designs that would create more efficient, smaller, and lighter products. This encouraged a group of design engineers and marketing leaders to explore creating a new industry group to focus on educating themselves and their customers as the industry began to implement and accept these evolving power technologies. At that time Electro, PowerCon and Westcon were the trade shows and conventions focusing on power electronics.
On Nov 15, 1985, the Power Sources Manufacturers Association, PSMA, was founded as a 501 C (6) nonprofit industry association. Three months later, in Feb of 1986, the first Board of Directors were elected at a meeting held in Dallas, TX. Tim Parrott served as President and Ron Koslow was PSMA's first Chairman. The Bylaws identified three levels of membership – Regular (Manufacturers of power sources and conversion equipment), Associate (Users of power sources and conversion equipment, or manufacturers of components designed for incorporation into power sources and conversion equipment) and Affiliate (Organizations involved in the power industry, including Manufacturer's Representatives, Distributors, Advertising, Marketing, Consulting, Publications).
 PSMA launches third year ( Click to enlarge ) |
To establish early credibility, the Board decided to create a "Handbook of Standardized Terminology for the Power Sources Industry". Michael Foldes led the Technical Committee that also included Dan Ketchum, Earl Crandall, Emilie Creagar, Chris DuBiel, Gene Goldberg, Sydele Petch and myself. This was before email and online collaboration tools; Michael sent us each an 8" disc for making our corrections suggestions and additions
 PEC 1989 ( Click to enlarge ) |
 PEC 1990 ( Click to enlarge ) |
To provide industry exposure PSMA co-sponsored the Power Electronics Conference, PEC, in San Jose in Feb of 1989. PSMA Chairman Art Hamill said, "we believe there is a need for an industry-wide forum which brings together the component suppliers, manufacturers and users of power sources and suppliers. That conference and exposition offered six half day Professional Education Seminars and nine Technical Sessions. One year later, in February 1990, PEC was held at the Long Beach California Convention Center and featured three tracks of "Issue Forums" to discuss industry trends.
To create "deliverables" a Research and Development Committee was formed, led by Donald Staffiere of Digital Equipment and John Woodard of ITT Power Systems, with members representing suppliers, users and university members. In 1990, the committee completed its first report to the Association on the status of R&D in the world and presented the results at the PSMA Annual Convention held in Long Beach, CA in conjunction with PEC. This report evolved over time into the current PSMA Power Technology Roadmap.
In March of 1990, John Steel represented PSMA at an IEEE PELS Power Electronics Retreat with leaders from industry and academia. Interestingly, the meeting minutes contained a sidebar that read, "This was the high energy point of the day. Even though we didn't quite know what that meant, we liked the words 'GREEN ENERGY".
 Larry Gilbert, John Rowbottom and Dave Kemp at the PSMA booth at the 1990 Canadian High Technology Show ( Click to enlarge ) |
Expanding PSMA's exposure, later that year we participated at the Canadian High Technology Show in Toronto. We conducted a Customer-Supplier partnership forum, Norm Berkowitz of Computer Products and myself representing the US, and Glen Belland (Electronic Craftsman) and John Rowbottom (NCR) representing Canada.
After the 1990 PEC and APEC conferences, a group representing PSMA negotiated with representatives of PELS and IAS to become the third financial and technical sponsor of APEC (Applied Power Electronics Conference). The Sponsor Agreement on the Continuing Operation of APEC was written by Bob White and the signers were John M. Steel, PSMA Chairman, Ronald M. Jackson, President IEEE Industrial Applications Society (IAS), and Thomas G. Wilson, President IEEE Power Electronics Society (PELS). In Jan of 1991, Dave Kemp and I were appointed Co-chairs of the APEC Technical Program Committee.
There are so many more names that deserve a shout out in the first five years of PSMA. A partial list of the PSMA family at that time includes: Norm Berkowitz, Mike Brown, Lee Campbell, Frank Cathell, Earl Crandall, Emilie Creagar, Chris DuBiel, Mike Foldes, Paul Fulton, Gene Goldberg, Art Hamill, Albert Himy, Dave Kemp, Dan Ketchum, Jim Kimball, Ron Koslow, John Lombardi, Sr., Doug McIlvoy, Mohan Mankikar, Chuck Mullett, Tim Parrott, Sydele Petch, Stu Roberts, Jeff Shepard, Don Staffiere, John Steel, David Thompson, Dean Venable, Ole Vigerstol, Bob White and John Woodard.
We hope to include another article on the early history of PSMA in a future issue of the UPDATE
|
Provided by Larry Gilbert,
|
 |